The correct use of conductive foam

Conductive foam is an ideal EMI shielding medium for use in applications where optical performance cannot be determined. Examples include high-resolution CRT displays, color displays, LCDs, and EL displays. The conductive film will reflect heat and is used in temperature-sensitive LCDs. The coating is supplied as an unsupported film with a length of up to 500 ft. The usual thickness is 0.125mm/0.17mm and the width is 762mm/1100mm. It can be laminated in polypropylene, polycarbonate or glass, and the ring Polarizer and dichroic filter combination. How to use conductive film?

      1. The transparent conductive film is conductive on one side and non-conductive on one side. When using, in order to protect the conductive surface, the conductive surface should be used in the design and installation, and the conductive surface should not be used.

      2. The transparent conductive film is very thin and transparent at the same time. It can be directly used together with the surrounding glass on the original panel.

      3. The surrounding of the transparent conductive film must be well grounded in order to exert the shielding performance. One of the convenient methods is to use copper or tin-plated copper to shield the self-adhesive tape. The conductive adhesive of the transparent conductive film is formed by the conductive adhesive of the shielding tape. Connection, at the same time to achieve structural bonding fixed.